The Pencil lead carving(Santa claus) 鉛筆の芯の彫刻(サンタクロース)

I finished to make Santa claus with the pencil just today.(pencil lead carving)

The concept is that Santa claus going into the chimney.

I made it with 4H 2mm pencil.

It was so hard to make the window with tiny a piece of wood.

The thickness of them are about 0.2mm.

I sprinkled the powder of starch on it to make it looks like snow.

Merry Christmas~

Rudolph the Red Nosed Reindeer (Pencil lead sculpture)

I carved Rudolph the Red Nosed Reindeer on the Pencil lead.

The diameter of the pencil lead is 2mm and the type of the pencil is 10H.(hardest)

I carved it through the microscope.

Tom Cruise (paper clay figure) トム クルーズ (紙粘土のフィギュア) 톰 크루즈(지점토 피규어)

I am making Tom Cruise with paper clay these days.

It's Top Gun's Tom Cruise.

This is My first attempt to make a figure in my life.

Now I realized why better to use recommended material like epoxy resins, sculpey etc.

The paper clay has a lot of fibroid material of paper so It's really hard to make clean surface of the model.

I'd better not to use this material from next work.

Anyway, This is in the middle of work.

Hopefully, I can finish it soon.

私は紙粘土でトム・クルーズを作っています。

これは、トップガンのトム・クルーズです。

これは私が作ったはじめてのフィギュアです。

エポキシ樹脂、スカルピーなどのように、推奨材料を使用することがなぜ良いのか よくわかりました。紙粘土は、纖維質をたくさん持っているので モデリングの滑らかな表面を作ることは本当に難しいです。

次の仕事からこの材料を使用しない方が良いと思います。

これはまだ仕事の途中です。

うまく完成できればいいなと思っています。

요즘 지점토로 만들고 있는 톰 크루즈.

영화 탑 건 버전.

처음으로 만들어보는 피규어인데,

왜 에폭시나 스컬피 등의 전문 재료로 만들어야 하는 지 알게 된.....

지점토의 섬유질때문에 도무지 면을 깨끗하게 정리할 수가 없다는 사실!

다음번엔 보다 나은 재료로 만들어 봐야겠다.